The device provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter. This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation. Internal soft start circuitry eliminates the need for an external soft start PTC reSIStor. The initial soft start frequency and soft start time can be easily adjusted depending on the tyPES of lamp. Prevent burning out of switches in no lamp condition. Internal 18V regulator clamps Vcc line of supply voltage for eliminating an external zener diode.
Features
• No lamp protection
• Low Start up & Operating Current
• Internal Soft Start • Flexible Soft Start Frequency
元佐電子系AUK、KODENSHI、Opto全系列產品(IC、MOS、LED、光电光耦传感器、二三极管等)中國大陸區唯一的原廠代理商! R94FV1A R24FV1A R54FV1A 1. APPlication This Specification is applied to inspection and aPPRoval of the IR Receiver Module for color TV, DVD, air conditioner and audio equipment 2. Description The Series are miniaturized receiver for infrared remote control system. The Pin Photodiode and preamplifier are assembled on lead frame. The epoxy package is designed as IR filter The module has excellent performance even in disturbed ambient light application and provides protection against uncontrolled ouTPUt pulses 3. Features 1) High ripple rejection 2) Wide operating supply voltage 2.7V ～ 6.0V 3) Supply current : 3.3V(0.9mA), 5.0V(1.0mA) 4) Band pass filter center frequency : 37.9kHz 5) Epoxy IR filter characteristic : 940nm 6) Maximum interference safety against optical and electrical disturbance 7) Internal filter for a high frequency lighting fluorescent lamp. 8) Internal Pull-Up output. : 40kΩ 4. ABSolute Maximum Ratings 1) Supply voltage : 7.0V 2) Supply current : 3.0mA 3) Operating temperature : -25℃ ～ +85℃ 4) Storage temperature : -40℃ ～ +125℃ 5. Cautions 1) Store and use where there is no force causing transformation or change in quality. 2) Store and use where there is no extreme humidity. 3) In order to prevent damage from static electricity, make sure that the human body and the soldering iron are connected to ground before using. 4) The ripple noise from power supply lines may shorten detecting distance of IR Receiver Module. Thus, in order to ensure more reliable operating please add RC filter (R=100Ω, C=47㎌) between Vcc and GND 5) When a disturbance signal is applied to the Series, it can still receive the data signal. However, the sensitivity is reduced to the level that no unexpected pulses will occur. Some examples of such disturbance signals which can be suppressed by the Series. ① DC light. (ex. From tungsten lamp or sunlight) ② Continuous signal at center frequency or any other frequency. ③ Signals from fluorescent lamps with electronic ballast with high or low modulation. 详细参数见网站规格书WWW.YOZO.HK
提示：该条供求信息时间过于久远，可能已经无效！
R24FV1A--R54FV1A
商机面向地区：
不限
发布日期：
2015年7月14日
供求信息分类：
电子/仪表 电子元件/组件
更新日期：
2015年7月14日
销售信息：
供应R24FV1A--R54FV1A
供求信息描述：
元佐電子系AUK、KODENSHI、Opto全系列產品(IC、MOS、LED、光电光耦传感器、二三极管等)中國大陸區唯一的原廠代理商! R24FV1A R54FV1A R94FV1A Features 1)High ripple rejection 2)Wide operating supply voltage 2.7V ～ 6.0V 3)Supply current : 3.3V(0.9mA), 5.0V(1.0mA) 4)Band pass filter center frequency : 37.9㎑ 5)Epoxy IR filter characteristic : 940㎚ 6)Maximum interference safety against optical and electrical disturbance 7)Internal filter for a high frequency lighting fluorescent lampOQSS-R-292 TYPE No. FILE No.2009. 10. 22. SHEET No.IR RECEIVER MODULE1 of 7 DATER24FV1ASPECIFICATIONS CODE NO. PART NAME1Vout)gqyggp 8)Internal pull-up : 42㏀4.
ABSolute Maximum Ratings 1)Supply voltage : 0 ~ 6.0V 2)Supply current : 0 ~ 3.0㎃ 3)OuTPUt current : 0 ~ 2.5㎃ 4)Operating temperature : -20℃ ~ +80℃ 5)Storage temperature : -30℃ ~ +85℃ 6)Soldering temperature (Pb Free) : 260℃(Max 5 sec) 详细参数见网站规格书www.yozo.hk
提示：该条供求信息时间过于久远，可能已经无效！
R943HB7G
商机面向地区：
不限
发布日期：
2015年7月14日
供求信息分类：
电子/仪表 电子元件/组件
更新日期：
2015年7月14日
销售信息：
供应R943HB7G
供求信息描述：
元佐電子系AUK、KODENSHI、Opto全系列產品(IC、MOS、LED、光电光耦传感器、二三极管等)中國大陸區唯一的原廠代理商! R943HB7G R943V17G 1. APPlication This Specification is applied to inspection and aPPRoval of the IR Receiver Module for TV, DVD, STB etc 2. Description The Series are miniaturized receiver for infrared remote control system.The PIN Photodiode and preamplifier are assembled on lead frame. The epoxy pacakge is designed as IR Filter.The module has excellent performance even in disturbed ambient light application and provides protectionagainst uncontrolled ouTPUt pulses. 3. Features 1)High ripple rejection 2)Wide operating supply voltage : 2.7V ~ 6.0V 3)Low current consumption : 3.0V(1.0㎃), 5.0V(1.2㎃) 4)Band pass filter center frequency : 37.9㎑ 5)Epoxy IR filter characteristic : 940㎚ 6)Maximum interference safety against optical and electrical disturbance 7)Internal filter for a high frequency lighting fluorescent lamp 8)Internal pull-up putput : 50㏀ 4. ABSolute Maximum Ratings 1)Supply voltage : 0 ~ 7.0V 2)Supply current : 0 ~ 3.0㎃ 3)Output current : 0 ~ 2.5㎃ 4)Operating temperature : -20℃ ~ +80℃ 5)Storage temperature : -30℃ ~ +85℃ 6)Reflow soldering temperature (Pb Free) : 260℃(Max 5 sec) 5. Cautions 1)Store and use where there is no force causing transformation or change in quality. 2)Store and use where there is no extreme humidity. 3)In order to prevent damage from static electricity, make sure that the human body and the soldering iron are connected to ground before using. 4)The ripple noise from power supply lines may shorten detecting distance of IR receiver module. Thus, in order to ensure more reliable operating please add RC filter(R=100Ω, C=47㎌) between Vcc and GND. 5)When a disturbance signal is applied to the series, it can still receive the data signal. However the sensitivity is reduced to the level that no unexpected pulses will occur. Some examples of such disturbance signals which can be suppressed pulses by the series. ⓐDC light(Ex. From tungsten lamp or sunlight) ⓑContinuous signal at center frequency or any other frequency ⓒSignals from fluorescent lamps with electronic ballast with high or low mosulation. 详细参数见网站规格书WWW.YOZO.HK