企业供求信息 [贸易商机]
企业详细资料  全部供求信息  全部产品

上海凯贤印刷科技有限公司

企业地址: 上海市嘉定区沪宜公路6106号 企业邮编: 201800
联系电话: 021-595079521-07 所属行业: 印刷/包装
公司传真: 021-595076351-06 公司所在地: 上海 嘉定区
公司网站: http://www.shkaixian.com 企业类型: 私营/民营
电子邮件: hzao445850506@qq.com 联系人: 赵绿林
企业全称: 上海凯贤印刷科技有限公司 QQ: 445855006
企业简介: 海凯贤印刷科技有限公司是一家以油墨生产.印刷耗材贸易.印刷加工为一体的公司。

免处理丝印PP料油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 免处理丝印PP料油墨    
供求信息描述:

免处理丝印PP料油墨销售厂家!
  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr

Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  

   

免处理PP料丝印油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 免处理PP料丝印油墨    
供求信息描述:

  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr

Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  

   

PP料免处理移印油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 PP料免处理移印油墨    
供求信息描述:

  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr

Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  

   

免处理PP料移印油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 免处理PP料移印油墨    
供求信息描述:

  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr

Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  

   

免处理移印PP料油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 免处理移印PP料油墨    
供求信息描述:

免处理移印PP料油墨销售厂家!
  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr

Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  

   

PP免处理油墨、免处理PP油墨、PP油墨

商机面向地区: 上海 嘉定区 发布日期: 2017年10月16日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 021-59579521-07
电子邮件: hzao445850506@qq.com
QQ: 445855006
销售信息: 供应 PP免处理油墨、免处理PP油墨、PP油墨    
供求信息描述:

PP油墨特性:免处理、耐磨达6级、耐刮达5级、耐精、白电油、溶济、抗酸、,曲折性好、好调色,耐候性佳,油墨细腻均匀好施工,划格子用3M胶子粘性能测试通过附着力强,低气味无毒油墨。
PP油墨用途:硬质PP、有处理之PE材质、如、文具夹、化状瓶、药瓶、商标、掉牌、溶器罐、头盔、汽车部件、电子制品配件、电器产品配件、特种行业的产品,等聚丙烯材质(PP)的印刷或喷涂工艺。
PP系列油墨
  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。

   

PP丝印油墨、丝印PP油墨、PP油墨

商机面向地区: 上海 嘉定区 发布日期: 2017年10月16日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 021-59579521-07
电子邮件: hzao445850506@qq.com
QQ: 445855006
销售信息: 供应 PP丝印油墨、丝印PP油墨、PP油墨    
供求信息描述:

PP油墨特性:免处理、耐磨达6级、耐刮达5级、耐精、白电油、溶济、抗酸、,曲折性好、好调色,耐候性佳,油墨细腻均匀好施工,划格子用3M胶子粘性能测试通过附着力强,低气味无毒油墨。
PP油墨用途:硬质PP、有处理之PE材质、如、文具夹、化状瓶、药瓶、商标、掉牌、溶器罐、头盔、汽车部件、电子制品配件、电器产品配件、特种行业的产品,等聚丙烯材质(PP)的印刷或喷涂工艺。
PP系列油墨
  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。

   

PP料免处理丝印油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 PP料免处理丝印油墨    
供求信息描述:

  油墨特性:拥有和德国彩丽宝一样的颜色,主要用于PP、PE、BOPP等材料上,具有高色泽、高色彩、高遮盖力、高稳定性、耐酒精及耐磨擦之特点。
  印刷:丝印移印均可。
  表干及实干时间:表干时间自然挥发5-10分钟;实干时间在24小时以内。
  稀释及清洗:SV3慢干开油水、UVK1(移印开油水)同时可使用718洗网水清洗。
  
  测试方法(完全干燥后):
  1、3m胶纸粘在画有百格的油墨表面,45度角迅速拉起不脱油;
  2、纯度99%的工业酒精,一千克砝码用棉布包住在油墨表面,以水平力来回拉200次无脱色;
  3、耐磨:橡皮擦500g力水平来回擦500次。
  
  使用方法:
  1、使用前应充分搅拌,用后随时封闭;
  2、搅拌时加开油水10-15%,稀释到印刷粘度;
  3、网板塞网时可用洗网水清洗;
  4、不得与其它类型油墨混合使用。
  
  注意事项:
  1、塑胶材料的外观相似,但可能会是不同的材料,客户需试印确定其符合要求后,再批量印刷;
  2、在移印过程中,如出现拉丝或散开,可适当加入一些慢干膏即可;
  3、环境温度过高,将会影响油墨原有质量;
  4、根据气候变化,请远离火源,阴暗环境下存放。
5、技术参考数见下表:
检验项目 检验结果 测试条件
油墨线度 ≤12um 刮板细度计
干膜光泽 ≥65° 60°镜面光泽计
干燥速度 表干 25℃×5-10min 或60℃×2-3min
实干 25℃12Hr或60℃×10min
耐酒精性 无变化 500克力/cm2酒精棉200次来回
附着力 100/100 1mm×1mm×100格3M胶纸剥离
耐酸性 无变化 浸泡5%HCI×24Hr
耐碱性 无变化 浸泡5%NaOH×24Hr
耐盐性 无变化 浸泡5%NaCI×24Hr
耐水性 无变化 浸泡20℃自来水×96Hr
耐磨性 不见底 500克/cm2负载含砂橡皮200来回
耐热性 无变化 80℃×12Hr

Ink characteristics: have and Germany Caili treasure the same color, is mainly used for PP, PE, BOPP and other materials, with a high color, high color, high covering power, alcohol resistant and wear resistance, high stability.
Printing: silk screen printing can be.
Table dry and work time: surface dry time natural volatile 5-10 minutes; work time within 24 hours.
Dilution and cleaning: SV3 slow dry open water, UVK1(printing open water) also can use 718 washing network water cleaning.
Test method (completely dry):
1, 3M adhesive tape sticky ink surface adhesion in painting,45 degree angle quickly pulled off the oil;
2, purity 99% of industrial alcohol, using cotton bag in the surface of the ink one kilogram weight to horizontal force and pull 200 times without decolorization;
3, wear: the eraser 500g force level wipe 500 times back and forth.
Method of use:
1, before the use should be fully mixing, use at any time after the closure;
2, mixing an additional 10-15% in oil and water, diluted to printing viscosity;
3, mesh plug mesh can be used when washing network water cleaning;
4, shall not be mixed with other types of ink.
The matters needing attention:
1, the plastic material of similar appearance, but may be of different materials, customers need to try to determine its requirements, and then bulk printing;
2, in the printing process, such as drawing or spread out,may be appropriate to add some slow dry paste can be;
3, the ambient temperature is too high, it will affect the quality of the original ink;
4, according to the climate change, please stay away from fire, stored in dark environment.
  

   

PP耐酒精丝印油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 PP耐酒精丝印油墨    
供求信息描述:

PP耐酒精丝印油墨销售厂家!
1、油墨特性:油墨中慢干,流平性好,移印吐墨均匀,丝印不易堵网,耐酒精,耐IPA〔异丙醇〕抗白电油, 耐胶水,可丝印,移印.
2、适用材质:预处理(未处理)PP料、PET料、OPP料、PPE料等;
3、技术参数:
a. 粘度:15000—30000CPS;

b. 过网性能:77T—120T;

c. 表干时间:自然挥发10分钟;

d. 实干时间:自然挥发24小时;

e. 固化剂:无需添加;

f. 烘烤干燥:120度30分钟;

g. 耐酒精5000g力来回超过100次,耐磨擦1000g来回超过50次,严格测试时间:自干24小时后或烤干后产品需静置30分钟。

4、稀释剂的选择:
a、 印前处理剂:PP料表面处理水;
b、 开油水:JS—3慢干开油水;
c、 JS—5中干开油水;
d、 JS—3A移印开油水;
e、 洗网水:JS—718。
5、注意事项:
a、使用前充分搅拌,用后随时封闭;
b、搅拌时加开油水10—20%,稀释到印刷粘度;
c、网板塞网时可用洗网水清洗;
d、不得与其它类型油墨混合使用;
e、 需多色套印时,应等前面的颜色表干20分钟后再套印下一颜色,待油墨完全干燥后再进行包装;
f、根据气候变化,请远离火源,避光环境存放。
6、应急处理措施:
a、如浸溅到眼部立即清水清洗,严重者就医、
b、灭火急救措施:用干粉,泡沫灭火器或沙子灭火。
温馨提示:因施工环境、施工人员等因素的不同,固此参数只供参考,不做投诉依据。请在批量使用前进行小样试用。

   

丝印PP耐酒精油墨

商机面向地区: 上海 嘉定区 发布日期: 2019年6月22日
供求信息分类: 化工 油墨 更新日期: 2023年11月16日
商机联系人: 赵绿林
供求电话: 18621979670
电子邮件: 81621976970@163.com
QQ: 445855006
销售信息: 供应 丝印PP耐酒精油墨    
供求信息描述:

丝印PP耐酒精油墨销售厂家!
承 印 物:PP(聚丙烯)、PE(聚乙烯)及类似材料

最终产品举例:各类文具、各类包装瓶罐(洗发水、化妆品包装)、蓄电池等产品特性。

产品特性:印刷品表面平滑,光泽好于PPF系列,对PP、PE材料有良好的附着力,印刷适应性佳,高耐磨性。

使用方法:1、网目:150-350网目。
2、网版:耐有机溶剂感光胶制作网版。
3、刮刀:60-90℃,耐溶剂刮刀,如聚胺脂刮刀。
4、用量:每公斤用250目网版可印刷36平方米。
5、印刷(印前准备,印刷过程)。

干 燥:自然挥发干燥(表干20分钟、实干24小时以上)或100℃以下热风吹干
选用溶剂:719快干水,718中干水,783慢干水,因印刷环境温度、通风量及印刷图案大小不同进行适当选择网板清洗:选用溶剂清洗(如:洗网水)

产品包装:1公斤装、5公斤装、20公斤装储存条件:5℃—25℃条件下可存放两年,避免强光照射、防接触强酸、强碱,用塑胶罐包装。

注意事项:

1、使用该产品进行印刷时,因PP、PE材质的表面张力较大,请先作好测试后再进行印刷。对于PE材料,有可能产生附着力不佳的现象,这时可以加入2%—5%的PP附着力促进剂进行印刷测试,视其效果。

2、对于表面张力较小的材料,可先用PP处理水或火焰处理法对底材进行处理后印刷,这样可以提高油墨的附着力。

3、该油墨属于慢反应固着型油墨,测试附着力必需在印刷后24小时以上再进行测试。

   
暂无信息……
请注意所有供求信息都由用户自行发布,本网不对任何信息的真实性及有效性负责
[ 用户登录 | 用户注册 | 使用帮助 | 站内导航 | 关于我们 ]
商業機器人 - 提供免费发布供求信息/产品/博客,公司企业黄页登记查询服务的B2B电子商务网站